VT machining offers CNC Laser Cutting for C630 Aluminum Bronze (UNS C63000 / CuAl10Ni5Fe4), typically supplied as extruded / annealed. Nickel-aluminium bronze: higher strength and seawater resistance than C623.
CNC Laser Cutting Notes for C630 Aluminum Bronze
Fibre-laser cutting of C630 Aluminum Bronze sheet gives a narrow kerf with minimal burr.
For estimating, a 100 × 100 × 10 mm block of C630 Aluminum Bronze weighs about 0.76 kg.
Process Data for CNC Laser Cutting C630 Aluminum Bronze
| Max practical thickness (6 kW fibre) | 8 mm |
|---|---|
| Assist gas | Nitrogen |
| Kerf width | 0.1-0.3 mm |
| Profile tolerance | ±0.05 mm (≤3 mm sheet) |
Typical values for C630 Aluminum Bronze, As extruded / annealed; confirmed on the first part.
C630 Aluminum Bronze Data Relevant to CNC Laser Cutting
| Equivalent designations | UNS C63000 / CuAl10Ni5Fe4 |
|---|---|
| Key composition | Al 9-11%, Ni 4-5.5%, Fe 2-4% |
| Density | 7.58 g/cm³ |
Typical values; we work to your drawing and mill certificate.
More on CNC Laser Cutting Bronze
Finishing options, quality documentation and general cnc laser cutting guidance for all bronze grades are on our CNC Laser Cutting Bronze page.
No drawing yet? Sketch the part in our free 3D + 2D builder and send it with your RFQ.
Quoting CNC Laser Cutting C630 Aluminum Bronze
Send a STEP/IGES model or PDF drawing, confirm C630 Aluminum Bronze and its condition (we usually see it supplied as extruded / annealed), the quantity, critical tolerances and any finish or certificate requirements.
C630 Aluminum Bronze in Other Processes
Related
Send the drawing, the C630 Aluminum Bronze condition and the quantity — pricing and lead time come back the same or next business day.
Request a QuoteFrequently Asked Questions
How clean are the edges produced by CNC Laser Cutting on C630 Aluminum Bronze?
Laser cutting leaves C630 Aluminum Bronze with a narrow kerf and a clean, near burr-free edge and only a small heat-affected zone.
What is CNC Laser Cutting C630 Aluminum Bronze and how is it done?
CNC Laser Cutting C630 Aluminum Bronze refers to cNC fiber laser cutting follows a programmed path to cut sheet and plate with a clean, narrow kerf. Applied to C630 Aluminum Bronze — high-strength and seawater-corrosion-resistant — VT machining produces each part to your CAD drawing, selecting parameters from your tolerance, finish and quantity requirements.
What material thickness or size range suits CNC Laser Cutting C630 Aluminum Bronze?
Laser-cut C630 Aluminum Bronze thickness depends on the alloy and its reflectivity; we tune the fiber source and assist gas accordingly.
What surface finish is achievable on C630 Aluminum Bronze with CNC Laser Cutting?
Laser cutting leaves a clean cut face on C630 Aluminum Bronze with a small heat-affected zone; most parts need little secondary finishing.
Does CNC Laser Cutting C630 Aluminum Bronze require dedicated tooling?
Most C630 Aluminum Bronze cutting work uses standard cutting tools and CNC programs; dedicated fixtures are made only when geometry or volume requires them.
What tolerances can you hold for CNC Laser Cutting C630 Aluminum Bronze?
Achievable tolerances for C630 Aluminum Bronze cutting depend on the alloy, geometry and feature size. Laser cutting holds contour tolerances to around ±0.05 mm depending on thickness. Exact figures are confirmed against your drawing callouts.