VT machining provides CNC Laser Cutting 310 Stainless Steel for customers who need accurate, repeatable 310 Stainless Steel components. The machinability of 310 Stainless Steel is moderate; work-hardens, so positive-rake tooling and steady feeds are used to avoid glazing, so we set the operation up specifically for this grade.
CNC Laser Cutting Capability for 310 Stainless Steel
- Austenitic/martensitic grades
- Corrosion resistant
- Tolerance to ±0.01 mm
- Typical hardness 70–200 HB (annealed)
310 Stainless Steel Material Data
| Density | 8.00 g/cm³ |
|---|---|
| Tensile strength | 515 MPa |
| Yield strength (0.2%) | 205 MPa |
| Hardness | 170 HB |
| Melting point | 1400–1450 °C |
| Thermal conductivity | 16.2 W/m·K |
| Thermal expansion | 17.3 ×10⁻⁶/K |
| Electrical conductivity | 2.4% |
| Machinability (C36000 = 100%) | 45% |
| Grades we run | 303, 304/304L, 316/316L, 321, 410, 416, 420, 17-4PH, 2205 duplex |
Published typical values for 304. Other grades in the family differ — the certificate supplied with your order carries the actual heat-lot figures.
It work-hardens the moment a tool dwells. Constant feed and positive-rake tooling; a rubbing pass leaves a glazed skin the next tool cannot get through.
Machining 310 Stainless Steel with CNC Laser Cutting
When cutting 310 Stainless Steel, machinability is moderate; work-hardens, so positive-rake tooling and steady feeds are used to avoid glazing. Our process plan reflects this so the finished part holds its tolerances without distortion or poor finish.
Documented parameters for 310 Stainless Steel mean predictable cycle times and stable, repeatable results.
Achievable Tolerances for CNC Laser Cutting 310 Stainless Steel
| Feature | Standard | Precision |
|---|---|---|
| Contour dimension | ±0.10 mm | ±0.05 mm |
| Hole diameter | ±0.10 mm | ±0.05 mm |
| Kerf width | 0.20 mm | 0.10 mm |
| Squareness of cut edge | 0.5° | 0.2° |
| Heat-affected zone | 0.15 mm | 0.05 mm (N₂ assist) |
| Minimum hole diameter | 1.2 × thickness | 1.0 × thickness |
| Edge condition | light dross | burr-free, N₂ cut |
Standard is what a normal quotation assumes. Precision is available on nominated features and is priced separately, because it needs extra setups, in-process gauging and CMM verification. Call out only the features that need it — blanket-tightening a drawing is the single most common reason a quote comes back expensive.
CNC Laser Cutting Tolerances & Surface Finish
Laser-cut 310 Stainless Steel holds contour tolerances around ±0.05 mm depending on thickness, with a narrow kerf and a clean, near burr-free edge.
Exact achievable figures depend on the alloy, the feature size and the part geometry. Tell us which dimensions are critical and we will advise feasibility up front.
CNC Laser Cutting Quality & Inspection
Quality is built in, not inspected on. We monitor key features during the run and confirm them at final inspection, with CMM verification available for tight tolerances. We provide the inspection and traceability records your quality system requires.
Secondary Operations & Finishing
Most 310 Stainless Steel parts need some finishing, which we manage in-house or through vetted partners. Options include deburring and edge-breaking, heat treatment, surface grinding, polishing, and plating or anodising for corrosion resistance and appearance. Give us the finished-part requirement and we will sequence every operation correctly.
Design Tips for CNC Laser Cutting 310 Stainless Steel
Small design adjustments often cut cost and lead time. Keeping holes no smaller than the material thickness, allowing for kerf, and grouping features sensibly improves edge quality and nesting yield on 310 Stainless Steel. If you send your model early, we will return practical DFM feedback before you commit to production.
Why 310 Stainless Steel?
Customers select 310 Stainless Steel for CNC Laser Cutting because it is corrosion resistant, strong and hygienic. We handle grade verification and any required heat treatment or finishing.
Applications of CNC Laser Cutting 310 Stainless Steel
310 Stainless Steel parts made this way are found throughout aerospace, medical, automotive, electronics and industrial equipment. Prototype, bridge and production volumes are all welcome.
How to Order CNC Laser Cutting 310 Stainless Steel
Starting your project takes one email. Send your CAD or 2D drawing, the 310 Stainless Steel grade and condition, the quantity and any finish or inspection requirements. We respond quickly with price, lead time and any DFM notes, in clear English.
Finishing Options for 310 Stainless Steel
| Finish | Thickness / effect | Why it gets specified |
|---|---|---|
| Citric passivation | — | ASTM A967 / AMS 2700, removes free iron |
| Electropolish | 5–25 µm removed | Ra improves by roughly half, hygienic surface |
| Brushed / grained | Ra 0.4–1.6 µm | No. 4 finish, directional |
| PVD coating | 2–5 µm | TiN, TiCN for wear surfaces |
| Deburr / edge break | 0.05–0.3 mm | All parts unless the drawing says otherwise |
| Bead blast | Ra 1.6–3.2 µm | Uniform matt finish, hides tool marks |
| Laser marking | — | Part number, lot code, data matrix |
No drawing yet? Build one in the browser.
Set the metal, dimensions and features, watch the 3D model update as you type, then switch to the 2D sheet to add dimensions and tolerances. Download it or send it straight to us with your RFQ.
What We Need to Quote CNC Laser Cutting 310 Stainless Steel
- GeometrySTEP or IGES for the 3D model, plus a PDF drawing if you have tolerance callouts. A dimensioned sketch is enough to start.
- MaterialThe exact 310 Stainless Steel grade and condition — temper, heat-treat state or hardness. If you are not sure, tell us the function and we will suggest one.
- QuantityPrototype count and the expected annual volume. Both change how the part is made and therefore what it costs.
- TolerancesWhich features are critical. Everything else runs to our standard tolerance, which is what keeps the price sensible.
- FinishSurface treatment, cosmetic requirements, and any faces that must be masked.
- DocumentsWhether you need a material certificate, dimensional report, FAIR or PPAP with the shipment.
Missing something from the list is not a problem — send what you have. We will come back with the specific questions rather than a generic form.
310 Stainless Steel in Other Processes
Related
Send the drawing, the 310 Stainless Steel condition and the quantity — pricing and lead time come back the same or next business day.
Request a QuoteFrequently Asked Questions
Does CNC Laser Cutting 310 Stainless Steel require dedicated tooling?
Most 310 Stainless Steel cutting work uses standard cutting tools and CNC programs; dedicated fixtures are made only when geometry or volume requires them.
Why is 310 Stainless Steel a good choice for CNC Laser Cutting?
310 Stainless Steel is corrosion resistant, strong and hygienic, which makes it well suited to CNC Laser Cutting. We tune the process to the alloy so the finished 310 Stainless Steel cutting part meets your dimensional and functional requirements.
What tolerances can you hold for CNC Laser Cutting 310 Stainless Steel?
Achievable tolerances for 310 Stainless Steel cutting depend on the alloy, geometry and feature size. Laser cutting holds contour tolerances to around ±0.05 mm depending on thickness. Exact figures are confirmed against your drawing callouts.
What is the typical lead time and minimum order for CNC Laser Cutting 310 Stainless Steel?
CNC Laser Cutting prototypes for 310 Stainless Steel can be produced quickly and scaled to series production. Send your drawing and quantity and we will advise lead time and any minimum order.