Looking for reliable CNC Honing Molybdenum? VT machining manufactures Molybdenum parts to tight tolerances and consistent quality. Molybdenum is very high melting point and thermal stability, so the process is set up specifically for the material.
Process Data for CNC Honing Molybdenum
| Stone | Aluminium oxide or CBN |
|---|---|
| Size tolerance | Ø ±0.002-0.005 mm, roundness ≤0.002 mm |
| Surface finish | Ra 0.1-0.3 µm, 30-45° cross-hatch |
Shown for Molybdenum, the most common Molybdenum grade we see for CNC Honing. Typical values for Molybdenum, Stress-relieved; confirmed on the first part.
CNC Honing Capability for Molybdenum
- Bore Ra to 0.1 µm
- Cross-hatch pattern
- Roundness within 0.002 mm
- Hydraulic-bore finishing
Molybdenum material properties, finishing options and grade notes are on our CNC Polishing Molybdenum page.
How CNC Honing Molybdenum Works
Abrasive media or tooling refine the Molybdenum surface in controlled stages, removing the previous step's marks until the target roughness and edge condition are reached.
Every job begins from your CAD model or 2D drawing. Fixturing and tool paths are planned so the most critical dimensions are produced in the most rigid, repeatable setup. Critical dimensions are checked on the first part and monitored through the run.
Achievable Tolerances for CNC Honing Molybdenum
| Feature | Standard | Precision |
|---|---|---|
| Surface roughness | Ra 0.8 µm | Ra 0.05 µm |
| Edge break | 0.1–0.3 mm | 0.05 ±0.02 mm |
| Material removed | 0.02 mm | 0.005 mm |
| Bore roundness after honing | 0.005 mm | 0.002 mm |
| Cross-hatch angle | 45° ±10° | 45° ±5° |
| Cosmetic grade | uniform satin | mirror, no visible lines |
| Masking of datum faces | on request | standard |
Standard is what a normal quotation assumes. Precision is available on nominated features and is priced separately, because it needs extra setups, in-process gauging and CMM verification. Call out only the features that need it — blanket-tightening a drawing is the single most common reason a quote comes back expensive.
CNC Honing Tolerances & Surface Finish
Finishing brings Molybdenum to a defined roughness target — from a uniform satin to Ra values as low as 0.05 µm — with controlled, repeatable edge breaks.
Final tolerances are governed by the material's behaviour, wall thickness and overall stiffness. We give honest DFM feedback if a callout would be costly or better achieved another way.
Design Tips for CNC Honing Molybdenum
A few design choices make a real difference to cost and quality. Telling us the target Ra, the cosmetic faces and any masking needs lets us finish Molybdenum efficiently without over-processing. If you send your model early, we will return practical DFM feedback before you commit to production.
Applications of CNC Honing Molybdenum
CNC Honing of Molybdenum supports parts across aerospace, medical, automotive, electronics, semiconductor, energy and general industrial sectors. We scale from one-off prototypes to ongoing production while holding the same quality.
Typical Molybdenum Parts for CNC Honing
Illustrative examples of CNC Honing Molybdenum parts and the callouts that usually drive the process plan. They show the kind of work that fits this process; they are not specific customer orders.
Deburred stamping
- Material
- Molybdenum
- Size
- 40 × 25 × 1 mm
- Key callouts
- Edge break 0.05–0.15 mm, no sharp edges
- Batch
- 30,000 pcs
Vibratory finished in media sized to reach every internal cutout.
Cosmetic housing
- Material
- Molybdenum
- Size
- 150 × 90 mm visible face
- Key callouts
- Uniform satin, no directional lines
- Batch
- 2,500 pcs
Grained in one direction with datum faces masked so they keep their tolerance.
Mirror-polished insert
- Material
- Molybdenum
- Size
- 80 × 50 mm cavity
- Key callouts
- Ra 0.05 µm, SPI A2
- Batch
- 60 pcs
Polished in five abrasive stages; skipping one leaves scratches the next cannot remove.
No drawing yet? Build one in the browser.
Set the metal, dimensions and features, watch the 3D model update as you type, then switch to the 2D sheet to add dimensions and tolerances. Download it or send it straight to us with your RFQ.
What We Need to Quote CNC Honing Molybdenum
- GeometrySTEP or IGES for the 3D model, plus a PDF drawing if you have tolerance callouts. A dimensioned sketch is enough to start.
- MaterialThe exact Molybdenum grade and condition — temper, heat-treat state or hardness. If you are not sure, tell us the function and we will suggest one.
- QuantityPrototype count and the expected annual volume. Both change how the part is made and therefore what it costs.
- TolerancesWhich features are critical. Everything else runs to our standard tolerance, which is what keeps the price sensible.
- FinishSurface treatment, cosmetic requirements, and any faces that must be masked.
- DocumentsWhether you need a material certificate, dimensional report, FAIR or PPAP with the shipment.
Missing something from the list is not a problem — send what you have. We will come back with the specific questions rather than a generic form.
Other Metals for CNC Honing
Other Processes for Molybdenum
Send the drawing, the Molybdenum grade and the quantity. You get pricing, lead time and any DFM notes back — usually within one business day.
Request a QuoteFrequently Asked Questions
What material thickness or size range suits CNC Honing Molybdenum?
We machine Molybdenum across a broad size range; share your part envelope for confirmation.
Can VT machining make custom Molybdenum parts to my drawing?
Yes. Molybdenum finishing is made to order from your CAD/2D drawing. Share your geometry, material grade, tolerance and quantity and we will confirm feasibility, lead time and pricing.
Which industries use CNC Honing Molybdenum parts?
CNC Honing Molybdenum parts are used across aerospace, medical, automotive, electronics, semiconductor and general industrial sectors — anywhere precise Molybdenum components are required.
What is the typical lead time and minimum order for CNC Honing Molybdenum?
CNC Honing prototypes for Molybdenum can be produced quickly and scaled to series production. Send your drawing and quantity and we will advise lead time and any minimum order.
Does CNC Honing Molybdenum require dedicated tooling?
Most Molybdenum finishing work uses standard cutting tools and CNC programs; dedicated fixtures are made only when geometry or volume requires them.
What tolerances can you hold for CNC Honing Molybdenum?
Achievable tolerances for Molybdenum finishing depend on the alloy, geometry and feature size. We hold tight, repeatable tolerances appropriate to the feature and material. Exact figures are confirmed against your drawing callouts.