CNC Gear Grinding Hard Alloys is a core capability at VT machining. We combine controlled gear cutting with material-aware setup for Hard Alloys — an alloy that is wear-resistant carbide and hardened tool materials — to produce parts that meet your specification first time.
Process Data for CNC Gear Grinding Hard Alloys
| Wheel (supply condition) | Diamond (resin or metal bond) |
|---|---|
| Depth per pass (rough / finish) | 0.005-0.015 / 0.002-0.005 mm |
| Achievable finish | Ra 0.1-0.2 µm |
| Typical size tolerance | ISO 1328 class 4-6 |
Shown for Tungsten Carbide, the most common Hard Alloys grade we see for CNC Gear Grinding. Typical values for Tungsten Carbide, Sintered; confirmed on the first part.
CNC Gear Grinding Capability for Hard Alloys
- DIN/AGMA accuracy class
- Profile & lead correction
- Hardened-gear finishing
- Low transmission noise
Hard Alloys material properties, finishing options and grade notes are on our CNC Gear Hobbing Hard Alloys page.
How CNC Gear Grinding Hard Alloys Works
Tooth profiles are generated in the Hard Alloys blank by a synchronised cutter, then refined to the required accuracy class. Module, pressure angle and helix are programmed from your gear data.
Programming is driven directly by your 3D model or print. Work-holding, tool selection and the cutting strategy are planned around the critical features and the material before the first chip is cut. First-off inspection confirms the process is centred before production continues.
Achievable Tolerances for CNC Gear Grinding Hard Alloys
| Feature | Standard | Precision |
|---|---|---|
| Accuracy class | DIN 8 / AGMA 10 | DIN 6 / AGMA 12 |
| Profile deviation | 0.020 mm | 0.008 mm |
| Lead deviation | 0.020 mm | 0.008 mm |
| Pitch deviation (cumulative) | 0.040 mm | 0.015 mm |
| Runout | 0.030 mm | 0.010 mm |
| Tooth surface finish | Ra 1.6 µm | Ra 0.4 µm (ground) |
| Module range | m0.5–m8 | m1–m6 |
Standard is what a normal quotation assumes. Precision is available on nominated features and is priced separately, because it needs extra setups, in-process gauging and CMM verification. Call out only the features that need it — blanket-tightening a drawing is the single most common reason a quote comes back expensive.
Design Tips for CNC Gear Grinding Hard Alloys
We are happy to suggest design tweaks that improve manufacturability. Providing complete gear data (module, pressure angle, profile shift, quality class) lets us produce Hard Alloys gears right the first time. If you send your model early, we will return practical DFM feedback before you commit to production.
CNC Gear Grinding Tolerances & Surface Finish
Gear features are produced to a specified DIN/AGMA accuracy class, with profile and lead controlled for quiet, durable running under load.
Exact achievable figures depend on the alloy, the feature size and the part geometry. Tell us which dimensions are critical and we will advise feasibility up front.
Applications of CNC Gear Grinding Hard Alloys
Customers order CNC Gear Grinding Hard Alloys components for everything from instrumentation to structural and functional assemblies. Whether you need a single prototype or recurring production volume, the same process discipline applies.
Typical Hard Alloys Parts for CNC Gear Grinding
Illustrative examples of CNC Gear Grinding Hard Alloys parts and the callouts that usually drive the process plan. They show the kind of work that fits this process; they are not specific customer orders.
Spur gear
- Material
- Hard Alloys
- Size
- m2, z40, 20° PA, face 20 mm
- Key callouts
- DIN 7, runout 0.02 mm
- Batch
- 500 pcs
Hobbed, hardened, then hard-finished; skipping the finish pass costs a full accuracy class.
Bevel gear pair
- Material
- Hard Alloys
- Size
- m2, z20/z40, 90° axes
- Key callouts
- DIN 8, mounting distance ±0.03 mm
- Batch
- 200 sets
Contact pattern checked on a rolling tester before release.
Splined shaft
- Material
- Hard Alloys
- Size
- DIN 5480, 26 × 1.5
- Key callouts
- Fit class H7/g6, runout 0.02 mm
- Batch
- 800 pcs
Spline hobbed with the journals ground afterwards on the same centres.
No drawing yet? Build one in the browser.
Set the metal, dimensions and features, watch the 3D model update as you type, then switch to the 2D sheet to add dimensions and tolerances. Download it or send it straight to us with your RFQ.
What We Need to Quote CNC Gear Grinding Hard Alloys
- GeometrySTEP or IGES for the 3D model, plus a PDF drawing if you have tolerance callouts. A dimensioned sketch is enough to start.
- MaterialThe exact Hard Alloys grade and condition — temper, heat-treat state or hardness. If you are not sure, tell us the function and we will suggest one.
- QuantityPrototype count and the expected annual volume. Both change how the part is made and therefore what it costs.
- TolerancesWhich features are critical. Everything else runs to our standard tolerance, which is what keeps the price sensible.
- FinishSurface treatment, cosmetic requirements, and any faces that must be masked.
- DocumentsWhether you need a material certificate, dimensional report, FAIR or PPAP with the shipment.
Missing something from the list is not a problem — send what you have. We will come back with the specific questions rather than a generic form.
Other Metals for CNC Gear Grinding
Other Processes for Hard Alloys
Send the drawing, the Hard Alloys grade and the quantity. You get pricing, lead time and any DFM notes back — usually within one business day.
Request a QuoteFrequently Asked Questions
What is CNC Gear Grinding Hard Alloys and how is it done?
CNC Gear Grinding Hard Alloys refers to gear grinding finishes hardened gear teeth to high accuracy class for quiet, durable transmission. Applied to Hard Alloys — wear-resistant carbide and hardened tool materials — VT machining produces each part to your CAD drawing, selecting parameters from your tolerance, finish and quantity requirements.
Why is Hard Alloys a good choice for CNC Gear Grinding?
Hard Alloys is wear-resistant carbide and hardened tool materials, which makes it well suited to CNC Gear Grinding. We tune the process to the alloy so the finished Hard Alloys gear cutting part meets your dimensional and functional requirements.
Does CNC Gear Grinding Hard Alloys require dedicated tooling?
Most Hard Alloys gear cutting work uses standard cutting tools and CNC programs; dedicated fixtures are made only when geometry or volume requires them.
What tolerances can you hold for CNC Gear Grinding Hard Alloys?
Achievable tolerances for Hard Alloys gear cutting depend on the alloy, geometry and feature size. We hold tight, repeatable tolerances appropriate to the feature and material. Exact figures are confirmed against your drawing callouts.
Which industries use CNC Gear Grinding Hard Alloys parts?
CNC Gear Grinding Hard Alloys parts are used across aerospace, medical, automotive, electronics, semiconductor and general industrial sectors — anywhere precise Hard Alloys components are required.