CNC EDM Drilling Aluminum from VT machining delivers precision Aluminum parts produced to your exact drawing. Fast-hole EDM drilling produces small, deep holes in hard metals, including starter holes for wire EDM, and we tune every parameter to the behaviour of Aluminum, which is lightweight, excellent machinability, good corrosion resistance.
Process Data for CNC EDM Drilling Aluminum
| Hole diameter range | Ø0.3-3.0 mm |
|---|---|
| Max depth-to-diameter | up to ~100:1 |
| Drilling speed, Ø1 mm | ~50 mm/min |
Shown for 6061 Aluminum, the most common Aluminum grade we see for CNC EDM Drilling. Typical values for 6061 Aluminum, T6 / T651; confirmed on the first part.
CNC EDM Drilling Capability for Aluminum
- Ø0.2–3 mm holes
- Deep aspect ratios
- Hardened-metal drilling
- Angled hole capability
Aluminum material properties, finishing options and grade notes are on our CNC Wire EDM Aluminum page.
How CNC EDM Drilling Aluminum Works
Material is removed from the Aluminum workpiece by controlled electrical discharges across a dielectric gap, with no mechanical contact. Flushing, on/off pulse timing and electrode/wire feed are set to balance speed against surface finish.
We start from your supplied geometry and tolerance scheme. The setup is designed to minimise re-clamping, which protects positional accuracy across features. A first article is verified against the drawing before the balance of the batch is released.
Achievable Tolerances for CNC EDM Drilling Aluminum
| Feature | Standard | Precision |
|---|---|---|
| Profile dimension | ±0.010 mm | ±0.002 mm |
| Internal corner radius | 0.15 mm | 0.05 mm |
| Taper control over 50 mm | 0.02 mm | 0.005 mm |
| Surface finish (skim passes) | Ra 0.8 µm | Ra 0.2 µm |
| Recast layer | 10 µm | 2 µm (fine skim) |
| Start-hole diameter | 1.0 mm | 0.25 mm |
| Workpiece hardness | no limit (conductive) | no limit (conductive) |
Standard is what a normal quotation assumes. Precision is available on nominated features and is priced separately, because it needs extra setups, in-process gauging and CMM verification. Call out only the features that need it — blanket-tightening a drawing is the single most common reason a quote comes back expensive.
Design Tips for CNC EDM Drilling Aluminum
Small design adjustments often cut cost and lead time. EDM suits sharp internal corners, thin ribs and hardened Aluminum that cannot be milled; allowing a small corner radius where possible speeds the cut. If you send your model early, we will return practical DFM feedback before you commit to production.
CNC EDM Drilling Tolerances & Surface Finish
EDM holds tolerances to roughly ±0.002–0.005 mm with no cutting force on the Aluminum part, producing fine, controlled surface textures and sharp internal corners impossible to mill.
The tightest tolerances are reserved for the features your drawing flags as critical. Share your tolerance scheme and we will confirm what is realistic before quoting.
Applications of CNC EDM Drilling Aluminum
Aluminum parts made this way are found throughout aerospace, medical, automotive, electronics and industrial equipment. Prototype, bridge and production volumes are all welcome.
Typical Aluminum Parts for CNC EDM Drilling
Illustrative examples of CNC EDM Drilling Aluminum parts and the callouts that usually drive the process plan. They show the kind of work that fits this process; they are not specific customer orders.
Carbide punch
- Material
- Aluminum
- Size
- Ø6 × 45 mm
- Key callouts
- OD ±0.003 mm, sharp form retained
- Batch
- 250 pcs
Carbide is EDM or grind only; there is no milling route.
Micro slot in nozzle
- Material
- Aluminum
- Size
- 0.15 mm wide × 6 mm deep
- Key callouts
- Width ±0.003 mm
- Batch
- 400 pcs
Cut with 0.1 mm wire; the start hole is EDM-drilled at Ø0.3 mm.
Extrusion die
- Material
- Aluminum
- Size
- 120 × 120 × 25 mm
- Key callouts
- Profile ±0.005 mm, internal corner R0.1 mm
- Batch
- 35 pcs
Cut in four skim passes; the first pass is speed, the last three are finish and accuracy.
No drawing yet? Build one in the browser.
Set the metal, dimensions and features, watch the 3D model update as you type, then switch to the 2D sheet to add dimensions and tolerances. Download it or send it straight to us with your RFQ.
What We Need to Quote CNC EDM Drilling Aluminum
- GeometrySTEP or IGES for the 3D model, plus a PDF drawing if you have tolerance callouts. A dimensioned sketch is enough to start.
- MaterialThe exact Aluminum grade and condition — temper, heat-treat state or hardness. If you are not sure, tell us the function and we will suggest one.
- QuantityPrototype count and the expected annual volume. Both change how the part is made and therefore what it costs.
- TolerancesWhich features are critical. Everything else runs to our standard tolerance, which is what keeps the price sensible.
- FinishSurface treatment, cosmetic requirements, and any faces that must be masked.
- DocumentsWhether you need a material certificate, dimensional report, FAIR or PPAP with the shipment.
Missing something from the list is not a problem — send what you have. We will come back with the specific questions rather than a generic form.
Other Metals for CNC EDM Drilling
Other Processes for Aluminum
Send the drawing, the Aluminum grade and the quantity. You get pricing, lead time and any DFM notes back — usually within one business day.
Request a QuoteFrequently Asked Questions
What material thickness or size range suits CNC EDM Drilling Aluminum?
We machine Aluminum across a broad size range; share your part envelope for confirmation.
Which industries use CNC EDM Drilling Aluminum parts?
CNC EDM Drilling Aluminum parts are used across aerospace, medical, automotive, electronics, semiconductor and general industrial sectors — anywhere precise Aluminum components are required.
What is CNC EDM Drilling Aluminum and how is it done?
CNC EDM Drilling Aluminum refers to fast-hole EDM drilling produces small, deep holes in hard metals, including starter holes for wire EDM. Applied to Aluminum — lightweight, excellent machinability, good corrosion resistance — VT machining produces each part to your CAD drawing, selecting parameters from your tolerance, finish and quantity requirements.
Why is Aluminum a good choice for CNC EDM Drilling?
Aluminum is lightweight, excellent machinability, good corrosion resistance, which makes it well suited to CNC EDM Drilling. We tune the process to the alloy so the finished Aluminum EDM machining part meets your dimensional and functional requirements.